Maintenance Training course list

課程代號 課程名稱 天數 先修課程 課程簡介
V93000 PS H/W V93000 Maintenance Training - Pin Scale (for SOC & HSM) 4 無 This class introduces the principles of V93000 system maintenance and system support for PinScale / SmartScale models, including diagnostics, calibration and troubleshooting.
This course is required if you intend to provide hardware self support.

The goal of this training is to make you familiar with:
 (1) Pinscale / SmartScale tester hardware architecture.
 (2) Routine system maintenance including running diagnostics and calibration.
 (3) Identify and repair system start and board failures.
 (4) Support Documentation.

Upon completion of this class you will be capable of performing all the standard troubleshooting and maintenance tasks using the provided troubleshooting tools.
V93000 PS RF H/W V93000 Maintenance Training - Port Scale RF 2 無 The goal of this training is to make your familiar with:
- PortScale RF tester hardware architecture.
- Routine system maintenance including running diagnostics and calibration.
- Identify and repair system start and board failures.
- Support Documentation.

Upon completion of this class you will be capable of performing all the standard troubleshooting and maintenance tasks using the provided troubleshooting tools.
Training outline:
 (1)  RF Hardware Elements
 (2)  RF Subsystem Configuration
 (3)  RF Source Card
 (4)  RF Front End Card
 (5)  MB-AV8 Card
 (6)  RF Port naming
 (7)  RF Calibration Hardware (cal kit)
T2000 H/W T2000 Maintenance Training 2 無 To provide the maintenance engineer with the basic skills and knowledge required to perform basic troubleshooting and repair, and perform required preventive maintenance routines for Advantest's T2000 Test Systems.

The participants can completion following after this training:
 (1) Know HW specification and structure of T2000
 (2) Know the unit function and signal process of T2000
 (3) FATAL error troubleshooting
 (4) Maintenance tasks including diagnostics and calibration
T5500 H/W T5500 Maintenance Training 2 無 The participants can completion following after this training
 (1) Know HW specification and structure of T55XX
 (2) Know the unit function and signal process of T55XX
 (3) Know the basic device test flow
 (4) Know the basic maintenance method
 (5) Know the basic test flow if T55XX
M6242 H/W M6242 Operation Training 2 無 The participants can completion following after this training
 (1) To know Handler Software Screen Configuration and Basic Operations.
 (2) To Know Handler Operation Start to End
 (3) To Know Clearing Alarms/ Jam
 (4) To Know Safety Functions
 (5) To Know Changing Kit Replacement
 (6) To Know Backing Up Handler Data

*若有課程需求，請與台灣教育訓練中心聯繫。

愛德萬測試股份有限公司 台灣教育訓練中心

聯絡人: 余惠菁 Dana Yu
報名專線: 03-5975723
傳真專線: 03-5981133
Email報名: dana-hj.yu@advantest.com
上課地點: 新竹縣湖口鄉新竹工業區光復路15號