Language
聯絡我們
Search
Menu

頁面上的內容可能以英文發布。

Maintenance Training course list - Taiwan

Can be swiped left or right.
課程代號 課程名稱 天數 先修課程 課程簡介
V93000 PS H/W V93000 Maintenance
Training - Pin Scale (for SOC & HSM) 		4 無

This class introduces the principles of V93000 system maintenance and system support for PinScale / SmartScale models, including diagnostics, calibration and troubleshooting.

This course is required if you intend to provide hardware self support.

The goal of this training is to make you familiar with:

  1. (1)
    Pinscale / SmartScale tester hardware architecture.
  2. (2)
    Routine system maintenance including running diagnostics and calibration.
  3. (3)
    Identify and repair system start and board failures.
  4. (4)
    Support Documentation.

Upon completion of this class you will be capable of performing all the standard troubleshooting and maintenance tasks using the provided troubleshooting tools.

V93000 EXA H/W V93000 Maintenance
Training - EXA Scale 		4 無

The goal of this training is to make you familiar with:

  1. (1)
    93000 EXA Scale CX/SX based tester hardware architecture.
  2. (2)
    Routine system maintenance including running diagnostics and calibration.
  3. (3)
    Identify and repair system start and board failures.
  4. (4)
    Support Documentation.

Upon completion of this class you will be capable of performing all the standard troubleshooting and maintenance tasks using the provided troubleshooting tools.

V93000 WS RF H/W V93000 Maintenance
Training - Wave Scale RF 		2 無

The goal of this training is to make you familiar with:

  1. (1)
    WaveScale tester hardware architecture.
  2. (2)
    Smartest 8.0 software maintenance WaveScale.
  3. (3)
    Identify and repair WaveScale board failures.
  4. (4)
    Support Documentation.

Upon completion of this training, you will be capable of performing all the standard troubleshooting and maintenance tasks using the provided troubleshooting tools.

T2000 H/W T2000 Maintenance
Training		 2 無

To provide the maintenance engineer with the basic skills and knowledge required to perform basic troubleshooting and repair, and perform required preventive maintenance routines for Advantest's T2000 Test Systems.

The participants can completion following after this training:

  1. (1)
    Know HW specification and structure of T2000
  2. (2)
    Know the unit function and signal process of T2000
  3. (3)
    FATAL error troubleshooting
  4. (4)
    Maintenance tasks including diagnostics and calibration
T5500 H/W T5500 Maintenance
Training		 2 無

The participants can completion following after this training

  1. (1)
    Know HW specification and structure of T55XX
  2. (2)
    Know the unit function and signal process of T55XX
  3. (3)
    Know the basic device test flow
  4. (4)
    Know the basic maintenance method
  5. (5)
    Know the basic test flow if T55XX
M6242 H/W M6242 Operation Training 2 無

The participants can completion following after this training

  1. (1)
    To know Handler Software Screen Configuration and Basic Operations.
  2. (2)
    To Know Handler Operation Start to End
  3. (3)
    To Know Clearing Alarms/ Jam
  4. (4)
    To Know Safety Functions
  5. (5)
    To Know Changing Kit Replacement
  6. (6)
    To Know Backing Up Handler Data
  • *
    若有課程需求或索取最新課程時間表，請與台灣教育訓練中心聯繫。

愛德萬測試股份有限公司 台灣教育訓練中心

聯絡人
余惠菁 Dana Yu
報名專線
03-6593670
報名Email
dana-hj.yu@advantest.com
上課地點
新竹縣竹北市台元二街12號4樓
ExcelPDF